Aircraft & Hangar
Aircraft maintenance puts technicians on curved, slippery surfaces high above a hard hangar floor. Protecting them takes systems that follow the worker across the airframe without obstructing the work.
- Work on wings, fuselage and tail at significant height over a hard floor.
- Curved, low-friction surfaces with few natural tie-off points.
- Large, open work envelopes that fixed anchors can't cover.
We design overhead rigid-track and bridge-and-trolley systems that travel the length of the aircraft, keeping the worker tied off from above with minimal free-fall.
Mobile work platforms and gangways position crews safely alongside the airframe, and free-standing systems suit hangars where roof structure can't carry the load.
Recommended systems
The fall protection systems we most often specify for this application.
Overhead Fall Protection
Overhead rigid-track and horizontal lifeline systems that keep workers tied off from above while they move freely below.
View systemPlatforms & Gangways
Work platforms, access gangways and mobile stairs that bridge the gap to trucks, railcars, tanks and equipment.
View systemAnchor Points & Lifelines
Roof anchors, davit arms, and horizontal/vertical lifelines — designed, fabricated and installed in-house, with annual recertification.
View systemProtect this application
Send us the details of your site and task, and we'll engineer a compliant, installed and certified solution.
Request a Quote